Suez logo

We bring together experienced professionals and advanced technologies to solve the world's most complex challenges related to water scarcity, quality, productivity, the environment and energy.

Harrington carries a wide variety Suez Cartridge Filters & Membrane Filters

Solving the toughest water and process challenges wherever they occur

SUEZ Water Technologies & Solutions filtration products offer the most comprehensive set of chemical and equipment solutions, and services available, helping customers manage and optimize their water resources and process challenges across industries and municipalities. We partner with our customers to help them reduce costs and prepare for the evolving demands of their industry.

The Harrington Difference
Providing over 60 years of exceptional service

Harrington is a leading SUEZ Water Technologies & Solutions  distributor. Call our toll-free number at 1-800-213-4528 and you will be connected to a live person – not a recording. You can also use the contact form below for any questions regarding our full line of SUEZ products.

Request Info - Brands Landing Page

  • State
  • Alabama
  • Alaska
  • Arizona
  • Arkansas
  • California
  • Colorado
  • Connecticut
  • Delaware
  • Florida
  • Georgia
  • Hawaii
  • Idaho
  • Illinois
  • Indiana
  • Iowa
  • Kansas
  • Kentucky
  • Louisiana
  • Maine
  • Maryland
  • Massachusetts
  • Michigan
  • Minnesota
  • Mississippi
  • Missouri
  • Montana
  • Nebraska
  • Nevada
  • New Hampshire
  • New Jersey
  • New Mexico
  • New York
  • North Carolina
  • North Dakota
  • Ohio
  • Oklahoma
  • Oregon
  • Pennsylvania
  • Rhode Island
  • South Carolina
  • South Dakota
  • Tennessee
  • Texas
  • Utah
  • Vermont
  • Virginia
  • Washington
  • West Virginia
  • Wisconsin
  • Wyoming
  • ~ U.S. Territory

SUEZ Purtrex Depth Cartridge Filters

The Purtrex depth filter is an exceptional value for general applications where long life, high purity and low change-out frequency are required. Produced through SUEZ’s patented melt blown microfiber technology, Purtrex is a 100% pure polypropylene depth filter with exceptional dirt-holding capacity.

SUEZ’s Purtrex true-graded density filter matrix (lower density at the surface of the filter with progressively higher density toward the center) captures particles throughout the entire filter depth. This translates to longer life and fewer change-outs than existing string-wound or resin-bonded filters.

Purtrex contains no wetting agents, solvents, anti-static agents or binders, and meets the requirements of the FDA for food and beverage contact. The filter incinerates to trace ash for easy disposal.

Typical Applications:

  • Potable water filtration
  • Chemical filtration – wide chemical compatibility
  • Plating baths
  • Amine Filtration
  • Meets FDA compliance for food and beverage contact
  • Nominal micron ratings: 1, 3, 5, 10, 20, 30, 50 and 75 microns

General Properties:

Purtrex filters are available with a variety of nominal pore size ratings: 1, 3, 5, 10, 20, 30, 50 and 75 microns. Tables 1, 2, 3 and 4 provide additional details on materials of construction, dimensions, operating limits and flow performance.

SUEZ Hytrex Depth Cartridge Filters

The purity and reliability of Hytrex cartridge filters ensure consistent results, time after time. Thermally bonded micro fibers create a strong secure cartridge that traps particles throughout its depth. Hytrex combines efficiency, long life and purity to create a high performance depth filter.

  • Pure polypropylene construction
  • Fast rinse-up in high purity applications
  • Meets the FDA requirement for food and beverage use
  • Wide chemical compatibility
  • Automated packaging for a clean finished product
  • NSF Standard 42 certified
  • Patented, continuous process assures consistent product performance. Lot-to-lot, order-to-order, strict quality control assures repeatability and
    reliability.
Harrington Industrial Plastics - GE Hytrex Depth Cartridge Filters

Typical Applications:

  • High Purity Chemicals
  • Bottled Water
  • Pre-treatment for Reverse Osmosis
  • Oil & Gas
  • Electronics

General Properties:

Hytrex Filters are available in a wide range of nominal pore sizes: 1, 2, 5, 10, 20, 30, 50, 75 and 100 microns. Tables 1, 2, 3 and 4 provide additional details on filter construction and performance.

SUEZ ROSave.Z Depth Cartridge Filters

ROSave.Z is manufactured using patent pending Z.Plex filter technology and is engineered for reverse osmosis pretreatment and other pure water applications. ROSave.Zs’ proprietary filter matrix provides unmatched performance.

  • Up to twice the life of conventional depth filters
  • Up to 50% lower pressure drop
  • Up to 100% greater dirt holding capacity
  • Superior SDI reduction
  • Melt-bonded exterior ensures no media migration
  • Provides lower total cost of filtration operations
  • NSF 42 certified, FDA compliant
Harrington Industrial Plastics - GE ROSave Z Depth Cartridge Filter

Typical Applications:

Reverse osmosis pretreatment in industries including:

  • Bottled water
  • Beverage
  • Electronics

Materials of Construction:

ROSave.Z filters are made of polypropylene construction. Tables 1 and 2 provide information on dimensions and flow performance.

SUEZ Absolute.Za Depth Cartridge Filters

Absolute Rated Depth Cartridge Filters Absolute.Za (Abs.Za) is manufactured using patented Z.Plex filter technology and is engineered specifically for absolute filtration. The patented filter matrix of the Absolute.Za provides unmatched performance in these applications. The Absolute.Za filter composition incorporates small diameter fibers and an innovative 3-dimensional fiber matrix. The filter matrix maintains structural integrity while greatly increasing the filter’s particle holding capacity and reducing pressure drop. This unique construction allows for absolute filtration and long life.

  • Up to twice the life of conventional depth filters
  • Up to 50% lower pressure drop
  • Up to 100% greater dirt holding capacity
  • Superior SDI reduction
  • Melt bonded exterior ensures no media migration
  • Provides lower total cost of filtration operations
  • NSF 42 certified, FDA compliant
  • Micron ratings: 1 and 5 micron nominal
  • Standard lengths fit most housings custom lengths are also available
  • Wide range of end adapters including self sealing spring, 222 and 226 O-rings, and extended cores.

Typical Applications:

  • Chemicals
  • Oil and gas
  • Pharmaceuticals
  • Food and Beverage

Materials of Construction:

100% polypropylene construction (filter, end caps
and core)

SUEZ High Flow Z Depth Cartridge Filter

High Flow Z is manufactured using patented Z.Plex filter technology and is engineered for RO pre-filtration, well injection, produced water disposal and other applications. High Flow Z’s proprietary filter matrix provides unmatched performance in these applications. High Flow Z Filters are available with four pore size ratings. They are made of 100% polypropylene construction.

  • Low pressure drop
  • Excellent dirt holding capacity
  • Graded density decreases blinding
  • Excellent temperature / oil resistance
  • Provides lower total cost of filtration operations
  • NSF 61 certified, FDA compliant
Harrington Industrial Plastics - GE High Flow Z

Typical Applications:

  • RO pre-filtration
  • Well injection
  • Produced water filtration
  • Water flood / enhanced oil recovery
  • Amine filtration
  • Seawater filtration

General Properties:

High Flow Z Filters are available with four pore size ratings. They are made of 100% polypropylene construction. Tables 1 and 2 show further details on dimensions, and flow rates of the High Flow Z.

High Flow Z cartridge filters are made from thermally bonded fibers of polypropylene. GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your SUEZ representative for more information.

SUEZ Flotrex

SUEZ Flotrex PN Pleated Filters with Polypropylene Microfiber Media

The Flotrex PN (FPN) microfiber filters offer an economical solution for your filtration needs. The all polypropylene construction of the FPN filters provides superior chemical compatibility. The gradient density, thermally bonded polypropylene media has excellent dirt holding capacities and reliable retention characteristics. FPN filters do not contain any adhesives or additives.

Typical Applications:

  • Filtration of liquid polymers, coatings, and inks
  • Filtration of bulk chemicals
  • Beer trap filtration
  • Post Carbon bed and DI bed filtration
  • Pre-filtration to protect expensive final filters

General Properties:

Flotrex PN filters are available in the following nominal pore size micron rating: 0.2 0.45, 1, 2, 3, 5, 10 and 30 μm.

Harrington Industrial Plastics - GE Flotrex PN

SUEZ Flotrex AP Pleated Filters with Polypropylene Microfiber Media

Constructed with gradient density thermally bonded polypropylene microfiber media, absolute rated Flotrex AP (FAP) filters combine exceptional solids-holding capacities with precise micron retention ratings. The FAP filters are constructed of FDA acceptable high-purity polypropylene. FAP filters are absolute-rated for air, gas and liquid filtration with low pressure drop across the wide range of 0.65 to 40 microns. Sheets of meltblown media are layered to provide absolute particle retention, high solids loading and long service life.

Typical Applications:

  • Prefiltration of Pharmaceuticals & Biological Fluids – protection for final filters
  • High Throughput for Beer Filtration
  • Prefiltration and Final Chemical Filtration – broad chemical compatibility

General Properties:

Flotrex AP filters are available in the following nominal pore size micron rating: 0.65, 1, 2, 3, 5, 10, 20 and 40 μm.

SUEZ Flotrex GF Pleated Filters with Polypropylene Microfiber Media

The Flotrex GF (FGF) filter is an absolute-rated, glass microfiber filter. The filters do not leach any flavor-altering substances and are ideal for final filtration applications. FGF filters have the important International Bottled Water Association (IBWA)-recommended 1.0-micron absolute rating. The FGF filter is just one example of our strong commitment to liquid, air and gas treatment. Our complete portfolio includes filters for every stage of processing, and we offer custom solutions for your unique applications. SUEZ is your complete source for filters, housings and other filtration equipment.

Typical Applications:

  • Final Filtration for Bottled Water
  • Beverage Clarification
  • Cosmetic Oil, Gel and Shampoo Filtration
  • Prefiltration of Pharmaceuticals and Biologicals
  • Paints, Inks and Coatings

General Properties:

Flotrex GF filters are available in the following nominal pore size micron rating: 0.45 and 3.0 μm and 1.0 um.

SUEZ Flotrex HR Halar (ECTFE) Pleated Filters with Microfiber Media

Flotrex-HR (FHR) filters are made entirely from Halar (ECTFE) an industrial-grade fluoropolymer with excellent solvent resistance. FHR filters can withstand the harshest process conditions due to this virtually indestructible material. Providing broad chemical compatibility, you can count on our filters to produce consistent, uniform process streams in your most demanding filtration applications.

FHR filters deliver high flow rates and high-purity results with absolute rated efficiencies (99.9% filtration efficiency at rated pore size based on ASTM F795 and F661 test methods) and retention characteristics that typically outperform polypropylene fiber filters.

FHR all-Halar, melt-blown fiber filters offer outstanding performance in extremely harsh chemical environments. These FHR filters also provide cost effective, absolute filtration at high flow rates. Available in a range of 3, 10 and 25 μm, FHR filters are manufactured and packaged in a cleanroom environment for assured cleanliness. FHR filters are designed for both pre- and final filtration

Typical Applications:

  • Flotrex-HR filters may be sanitized with compatible chemical agents such as ozonated water. The filters must not be autoclaved or steam sterilized.
  • Flotrex-HR filters meet the test criteria for USP24 class VI-121°C plastics and pass the MEM Elution Cytotoxicity Test.
  • Aqueous extracts from Flotrex-HR filters contains less than 0.25 EU/ml. The filters typically exhibit low levels of non-volatile residues. FHR filters are ozone tolerant for 9,000 ppm/hr with no extractables.

Applications:

  •  Filtration of aggressive chemicals including
  • Filtration of Ozonated Water
  • Beverage
  • Toluene and Xylene

SUEZ Memtrex

SUEZ Memtrex MP Membrane Filter Cartridges

Memtrex MP (MMP) filters constructed with hydrophilic polyethersulfone membranes and all polypropylene components, exhibit both enhanced throughput and reliable particle retention for superior performance in most applications. MMP filters are compatible with a broad range of chemicals and pH extremes. The low protein binding characteristics of the polyethersulfone membranes ensure that MMP filters are suitable in a variety of beverage, chemical and pharmaceutical applications.

Applications:

  • Chemical Process Industry
  • Food & Beverage
  • Microelectronics
  • Medical & Pharmaceutical Applications

SUEZ Memtrex PC Membrane Filter Cartridges

Memtrex PC (MPC) filters’ unique polycarbonate track-etch membrane leads the market for precise filtration, broad chemical compatibility, and fast conductivity and TOC rinse-down in ultrapure water systems. MPC filters’ precise micron cutoffs and very low pore sizes down to 0.05 micron provide you with high purity filtration for all of your critical electronic, chemical and highly technical processes.

Applications:

  • Pure Chemical Filtration
  • Inks and Dyes
  • Ultrapure Water Filtration
  • Plating Solutions

SUEZ Memtrex MP-B Membrane Filter Cartridges

Memtrex MP-B (MMP-B) filters offer a PES membrane specifically designed for beverage applications. MMP-B cartridge filters exhibit the low protein-binding, high flow rates and high throughputs that are crucial for today’s demanding beverage process. Every filter is 100% integrity tested. As industry standards rise and new precautions are taken to ensure product purity, you can rely on GE Water & Process Technologies MMP-B filters to provide reliable filtration for all your beverage applications—bottled water, beer, wine, liquor, fruit juices, and fountain drinks.

Applications:

  • Wine
  • Beer
  • Fruit Juices
  • Bottled Water

SUEZ Memtrex NY Membrane Filter Cartridges

Memtrex PC (MPC) filters’ unique polycarbonate track-etch membrane leads the market for precise filtration, broad chemical compatibility, and fast conductivity and TOC rinse-down in ultrapure water systems. MPC filters’ precise micron cutoffs and very low pore sizes down to 0.05 micron provide you with high purity filtration for all of your critical electronic, chemical and highly technical processes.

Applications:

  •  Pure Chemical Filtration
  • Inks and Dyes
  • Ultrapure Water Filtration
  • Plating Solutions

SUEZ Memtrex MP-S Membrane Filter Cartridges

Memtrex* MP-S filters are designed for final sterile filtration of biological and pharmaceutical products. The double-layer PES membrane provides low protein-binding, high throughput and broad chemical compatibility for your critical filtration processes. Memtrex MP-S filters are available with an absolute pore size micron rating of 0.2 μm.

Applications:

  • Final Filtration of Drugs and Biologicals
  • Water for Injection and Pure Water for Dialysis
  • LVPs, SVPs
  • Diagnostics
  • Tissue Culture Media
  • Vaccines

SUEZ Memtrex FE Membrane Filter Cartridges

Memtrex FE (MFE) filters with absolute rated PTFE membranes offer broad chemical compatibility with minimal extractables in a wide range of fluids and applications. The inherently hydrophobic PTFE membrane is ideally suited for the filtration of compressed air and other process gases. 

Constructed in a clean room environment using thermal welding techniques, the MFE filters do not contain any adhesives or additives. As part of the manufacturing process, the MFE filters are individually integrity tested. The effectiveness and purity of your filtration process is preserved.

Applications:

  • Aggressive solvents such as alcohols, esters and ketones
  • Corrosive acids and bases
  • Vents/exhausts for autoclaves, fermentors, and storage tanks
  • Chemicals and water used in electronics manufacturing

SUEZ Memtrex MP-E Membrane Filter Cartridges

The Electronics (E) Grade Memtrex-MP-E filters are manufactured utilizing a high-purity rinse on each and every filter to reduce TOC and trace metals below 5.0 ppb. This is ideal for final filtration on DI water pads and POU applications. These filters are also 100% integrity-tested to ensure reliable particle retention. The MMP-E filter is just one example of our strong commitment to the electronics industry. Our complete portfolio includes filters for every stage of processing, and we offer custom solutions for your unique applications. SUEZ Water Technologies & Solutions is your complete source for filters, cross-flow membranes, housings and other filtration equipment.

Applications:

  • Ultrapure semiconductor water.
  • UPDI Water Pad
  • High Purity Chemicals
  • Point of Use Applications

SUEZ Memtrex FE-S Membrane Filter Cartridges

Memtrex FE-S (MFE-S) filters are sterilizing grade cartridge filters for use in validated applications. The inherently hydrophobic MFE-S filter is just one example of our strong commitment to the pharmaceutical industry. 

Our complete portfolio includes filters for every stage of processing, and we offer custom solutions for your unique applications. SUEZ Water Technologies & Solutions is your complete source for filters, cross-flow membranes, housings and other filtration equipment.

Applications:

  • Tank Venting
  • Fermentation Air Supply
  • WFI Tanks
  • Autoclaves
  • Chemicals
  • Bioreactors

SUEZ Memtrex PM Membrane Filter Cartridges

Memtrex PM (MPM) filters’ 100% polypropylene construction offers low extractables, long service life and broad chemical compatibility. Thermoplastic sealing techniques are used in the cartridge construction eliminating the need for glues or sealers which could leach contaminates. MPM filters are integrity testable. All components are made of FDA-acceptable materials and meet the test criteria for the USP24 Class VI 121°C plastics.

Applications:

  • Vent and Process Air
  • Etchants & Photoresists
  • Solvents, Acids and Bases
  • Ultrapure Chemicals

SUEZ Memtrex HFE - Halar PTFE Membrane Filter Cartridges

Memtrex HFE are made entirely from fluoropolymer materials including Halar (ECTFE) and PTFE. Halar is an industrial-grade fluoropolymer with excellent solvent resistance. MHFE benefits of the edge lamination technology assuring a lower pressure drop and increasing flow rate. MHFE filters can withstand the harshest process conditions due to its construction using these highly resistant materials. Providing broad chemical compatibility, you can count on our filters to produce consistent, uniform process streams in your most demanding filtration applications. MHFE deliver high flow rates and high purity results with absolute rated efficiencies (99.9% filtration efficiency at rated pore size based on ASTM F795 and F661 test methods) and retention characteristics that outperform other filters.

Applications:

  • Chemicals
  • Microelectronics
  • Pharmaceuticals

SUEZ XPleat

SUEZ XPleat PES Membrane Filter Cartridges

SUEZ filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. The materials contained within the XPleat PES filters meet U.S. FDA requirements for food contact under the applicable regulations in 21CFR. XPleat PES filters meet the test criteria for USP Class VI-121C Plastics. Xpleat filters are available the following absolute pore size micron ratings: 0.1, 0.2, 0.45 and 0.65 μm.

Applications:

  • General water services
  • Fine process fluid filtration
  • Processes that require excellent flow rates

SUEZ XPleat GF Membrane Filter Cartridges

SUEZ Water & Process Technologies filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. XPleat GF filters are available in nominal and absolute micron ratings. Nominal micron ratings are: 0.2, 0.45, 1.0, 3.0 and 10.0 μm. Absolute micron ratings are 1.0, 2.0, 4.0, 8.0 and 15.0 μm.

Applications:

  • General water services
  • Fine process fluid filtration
  • Processes that require excellent flow rates

SUEZ AD LE Series

High Rejection High Flow Seawater RO Elements

The AD LE Series, family of proprietary thin film reverse osmosis membrane elements, is characterized by an excellent sodium chloride rejection. AD LE series is selected when high quality permeate is demanded from seawater that is relatively high in TDS. AD LE Series new membrane chemistry provides excellent rejection characteristics when operated at seawater operating conditions (pressures exceeding 800psi (5,516kPa) and elevated seawater temperatures.

Harrington Industrial Plastics - GE AD LE Series High Flow Seawater

SUEZ AG Series

Standard Brackish Water RO Elements

The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and high sodium chloride rejection. AG Standard Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psi (1,379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard in the industry.

SUEZ AK Series

Low Energy Brackish Water RO Elements

The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and high sodium chloride rejection. AK Low Pressure Brackish Water Elements are selected when high rejection and low operating pressures are desired. These elements allow significant energy savings since good rejection is achieved at operating pressures as low as 100 psi.

AE HR Series

High Rejection Low Energy Seawater RO Elements

The AE HR series of proprietary thin film reverse osmosis membrane elements are characterized by an excellent sodium chloride rejection. AE HR series is selected when high quality permeate is demanded from seawater that is relatively high in TDS. AE HR series new membrane chemistry provides excellent rejection characteristics when operated at seawater operating conditions (pressures exceeding 800psi (5,516kPa).

CK Series

Water Softening NE Elements (Cellulose Acetate)

C-Series family, a triacetate / diacetate blend, has a higher flux and better mechanical stability than standard cellulose acetate. C-Series elements offer an increased chlorine resistance compared to thin-film elements. CK Nanofiltration Elements are used for water softening, color removal, and reduction of THM potential when chlorine is required.

HL Series

Water Softening NF Elements

The H-Series proprietary thin-film nanofiltration membrane elements are characterized by an approximate molecular weight cut-off of 150-300 daltons for uncharged organic molecules. Divalent and multivalent ion rejection is dependent upon feed concentration and composition. HL Nanofiltration Elements are used for water softening, color removal, and reduction of THM formation potential.

PW Series

Industrial Ultrafiltration - Post Treatment of RO and NF

The P-Series family of polyethersulfone ultrafiltration membrane elements are characterized by a 10,000 molecular weight cut-off and greater than 96% rejection of Cytochrome-C (13,300 MW protein). PW Elements are used for pretreatment of process water, post treatment of ultrapure water and for the removal of organics.